Dynoman Performance - Austin Texas - Motorcycle Racing Parts


Shop by Model at Dynoman Performance
- CB750 SOHC
- CB750 F2
- CB750/900/1100F
- NT650GT HAWK
- CB500/550/650
- CB350/400F
- KZ900/1000/GPz
- ZRX1100 / 1200
- GS1000
- GS1100/1150

~ All other bikes please
  choose from the menus
  below!


Shop at Dynoman Performance

ENGINE PACKAGES
- CB750/900F/CB1100F
- CB750 SOHC
- CB750 F2
- CB550 / CB500
- KZ900 / 1000
- GS1000
- GS1100

ENGINE PARTS
- Camshafts
- Cam Sprockets
- Clutches
- Connecting Rods
- Cylinder Sleeves
- Gasket Sets
- Gaskets,
Head & Base
- Piston Kits
- Rings
  Sleeves
- Studs,
Top & Bottom
- Valves
- Valve Train
- More...

CARBURETION
- Keihin CR
- Keihin FCR
- Keihin Accessories
- Mikuni RS
- Air Filters
- Push/Pull Throttles
- Vent Filters
- Intake Manifolds
- Dynojet Jet Kits
- Pingel Petcocks
- Carb Sync Tool
- More...

IGNITION
- Dyna 2000
- Dyna S
- Dyna Coils
- Dyna Wires
- NGK Spark Plugs
- Dyna Rev Limiter
- More...

EXHAUST
- Kerker / Supertrapp
- Baffles

SUSPENSION
- Ohlins Shocks
- Progressive Shocks
- Steering Dampers

BRAKES
- EBC Brakes


Shop for motorcycle parts at Dynoman
- Barnett Clutches
- Carrillo Rods
- Cometic Gaskets
- CP Pistons
- Dyna Ignitions
- EBC Brakes
- Falicon Rods
- JE Pistons
- K&N Filters
- Keihin Carbs
- Kerker Headers
- Kibblewhite
(KPMI)
- Mikuni Carbs
- NGK Plugs
- Ohlins Shocks
- Pingel Petcocks
- Progressive Shocks
- Vesrah Gaskets
- WebCam Cams
- Wiseco Pistons


Contact Dynoman Performance
- Order Information
- Technical Sheets
- FAQ
- Customer Builds
- Contact


DYNA PERFORMANCE COILSDyna Coils

 

These high tech, top quality coils are designed for maximum performance and are encased in a high impact thermoplastic housing - not paper wrapped like cheap imitations. They produce spark voltages in excess of 30,000 volts and spark energies second to none.
Made in the USA!
  more...

 

 

Part # # of out
puts
Primary
resistance
Secondary resistance Color Qty

Price

DC1-1 COILS
Dyna DC1-1
2 3.0 ohms


NOTE: 5.0 ohm coils are recommended for most CB500/550 applications - DC8-1
14,400 ohms Green 2 Retail $163.00
DP PRICE
$139.95

DC1-1 Coil Set with DW200 WiresDyna Wires
Just $16.95 more!

 

 

$156.90
 
DC1-2 MINI COILS
Dyna DC1-2

more Mini Coils available below

2 3.0 ohms 11,500 ohms Gray 2 Retail $172.00
DP PRICE
$146.95

DC1-2 Mini Coil Set with DW600 Resistor WiresDyna Wires
Just $16.95 more!

*Note: Mini Coils will not work with contact points or Dyna S Ignitions.
  Designed specifically for use with Dyna 2000 systems
.

more Mini Coil info >>

 

$163.90
DC4-1  COILS
Dyna DC4-1

2 2.2 ohms 14,000 ohms Grey 2 Retail $163.00
DP PRICE
$139.95

DC4-1 Coil Set with DW200 WiresDyna Wires
Just $16.95 more!

 

$156.90
DC8-1 COILS
Dyna DC8-1
2 5.0 ohms 14,000 ohms Black 2 Retail $163.00
DP PRICE
$139.95

DC8-1 Coil Set with DW200 WiresDyna Wires
Just $16.95 more!

 

 

$156.90
DC9-4 COILS
Dyna DC9-4 Coils
1 0.7 ohms 14,000 ohms Blue 2 Retail $159.00
DP PRICE
$99.95

DC9-4 Coil Set with DW200 WiresDyna Wires
Just $16.95 more!

Limited to stock on and!

 

$116.90
DC10-1 COILS

1 5.0 ohms 14,000 ohms Black 2 Retail $159.00
DP PRICE
$99.95

DC10-1 Coil Set with DW200 WiresDyna Wires
Just $16.95 more!

Limited to stock on hand!

 

$116.90
 


more info on Dyna Mini Coils >>
 

MINI COILS:
For use with Dyna 2000 & 3000, factory installed electronic ignitions
Part # # of out
puts
Primary
resistance
Secondary resistance Color Qty

Price

DC3-2 MINI COILS
Dyna Mini Coils
1 3.0 ohms 11,500 ohms Gray 2 Retail $172.00
DP PRICE
Closeout
$109.95
DC3-2 Mini Coil Set with DW600 Resistor WiresDyna Wires
Just $16.95 more!

Limited to stock on hand!

 


$126.90
more info on Dyna Mini Coils >>

 

DYNA COILS work with point ignitions, aftermarket electronic ignitions and factory electronic ignitions. Before selecting a coil, check the coil primary resistance requirements as specified by the manufacturer of the ignition being used.

FEATURES & BENEFITS:

  • No exposed laminations to rust and degrade performance.

  • High voltage and primary terminals machined from brass.

  • Ultrasonically welded and sealed against moisture.

  • Compact size fits easily under stock covers.

  • Peak gap current in excess of 50mA.

  • High impact thermoplastic housing.

  • Over 40,000 volts per output.

  • Accepts 7 to 8.8mm wires.

  • 1 year warranty.

 

 

DYNA IGNITION SYSTEM COIL REQUIREMENTS -

DYNA 4000 Pro Ignition:
Must use DC9-1 or DC9-2. The DYNA 4000 ignition system is designed for racing only and is matched to the characteristics of the DC9-1 coil for optimum energy production.

Recommended - DC7-1, DC8-1, DC10-1, DC3-1, DC6-1. Use coil with 5.0 ohms primary resistance for street use, 3.0 ohms primary resistance for racing applications.

Single Plug Head:

Single Fire - Use two single output coils, street or strip.

Dual Fire - Use one dual output coil, street or strip.

Dual Plug Head:

Single Fire - Use two dual output coils, street only.

Dual Fire - Use two dual output coils, street or strip.

Dual Plug Head, single fire racing applications:

Use two DC2-1, 1.5 ohm coils, connected in series for each cylinder. Since these coils are dual tower, one tower of each coil must be shorted to chassis ground.

DYNA S (non-Harley):

Recommended - DC1-1. Use coil with 3.0 ohms primary resistance.

 

 

 

 

 

 

 

 

 

 
 
 
For your security and ours, we process
our payments
through Paypal.
PayPal Logo
PayPal Acceptance Mark


2000-17 DynomanPerformance.com
All rights reserved. Prices, descriptions, and products subject to change without notice.

dynoman-performance@austin.rr.com