Dynoman Performance - Austin Texas - Motorcycle Racing Parts


Shop by Model at Dynoman Performance
- CB750 SOHC
- CB750 F2
- CB750/900/1100F
- NT650GT HAWK
- CB500/550/650
- CB350/400F
- KZ900/1000/GPz
- ZRX1100 / 1200
- GS1000
- GS1100/1150

~ All other bikes please
  choose from the menus
  below!


Shop at Dynoman Performance

ENGINE PACKAGES
- CB750/900F/CB1100F
- CB750 SOHC
- CB750 F2
- CB550 / CB500
- KZ900 / 1000
- GS1000
- GS1100

ENGINE PARTS
- Camshafts
- Cam Sprockets
- Clutches
- Connecting Rods
- Cylinder Sleeves
- Gasket Sets
- Gaskets,
Head & Base
- Piston Kits
- Rings
  Sleeves
- Studs,
Top & Bottom
- Valves
- Valve Train
- More...

CARBURETION
- Keihin CR
- Keihin FCR
- Keihin Accessories
- Mikuni RS
- Air Filters
- Push/Pull Throttles
- Vent Filters
- Intake Manifolds
- Dynojet Jet Kits
- Pingel Petcocks
- Carb Sync Tool
- More...

IGNITION
- Dyna 2000
- Dyna S
- Dyna Coils
- Dyna Wires
- NGK Spark Plugs
- Dyna Rev Limiter
- More...

EXHAUST
- Kerker / Supertrapp
- Baffles

SUSPENSION
- Ohlins Shocks
- Progressive Shocks
- Steering Dampers

BRAKES
- EBC Brakes


Shop for motorcycle parts at Dynoman
- Barnett Clutches
- Carrillo Rods
- Cometic Gaskets
- CP Pistons
- Dyna Ignitions
- EBC Brakes
- Falicon Rods
- JE Pistons
- K&N Filters
- Keihin Carbs
- Kerker Headers
- Kibblewhite
(KPMI)
- Mikuni Carbs
- NGK Plugs
- Ohlins Shocks
- Pingel Petcocks
- Progressive Shocks
- Vesrah Gaskets
- WebCam Cams
- Wiseco Pistons


Contact Dynoman Performance
- Order Information
- Technical Sheets
- FAQ
- Customer Builds
- Contact


HEAD & BASE GASKETSDynoman Performance Engine Gaskets
MADE IN THE USA!

HONDA KAWASAKI SUZUKI YAMAHA  
CB400F
CB500/550/650
CBR600 F2, F3, rr
NT650 Hawk
CB750 SOHC all
CB750 DOHC
CB900 DOHC
CB1100F

RC51/RVT1000r
KZ750/GPz750/Turbo
ZX-7 1991-95
KZ900/1000/Z1
ZX-9
ZX900/1000 Ninja
KZ1000J/GPz1100
ZX11C & D/GPZ1100 late
ZRX1200
GSXr750/1000
GS750
GS1000
GS1100
YZF1000/FZR
XS1100
About MLS

About Rubber Coated Steel

Vesrah Gasket Sets

 

  HONDA

     1969-78 Honda CB750 K&F
          HEAD Gaskets
         BASE Gaskets
          Vesrah Complete Gasket sets

     

CB400F 1975-76  
        
#DP H-56-CFM043 Head Gasket
   56mm -- CFM-20 -- .043"

   $54.34 


 
CB500/550 1971-78  &  CB650 79-82  
        
     60mm  |  61mm  |  62mm  |  Base Gaskets
60mm HEAD GASKETDynoman gaskets
  
CFM-20
   .043" Thick
   For 59 to 60mm bore size
.
   For use with DP572 Kits

   #DP H-60-CFM043
   $54.34

60mm HEAD GASKETDynoman gaskets
  
CFM-20
   .059" Thick
   For 59 to 60mm bore size
.
   May be used with DP572 Kits
     Will alter compression ratio.

   #DP H-60-CFM059
   $54.34

60mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .030" Thick
   For 59 to 60mm bore size.
   May be used with DP572 Kits,
     Will alter compression ration,
     please check clearances carefully.

   #DP H-60-MLS030
   $79.95

MLS Head Gasket at Dynoman60mm HEAD GASKET
   Multi-Layer Steel (MLS)
   .040" Thick
   For 59 to 60mm bore size.
   For use with DP572 Kits

   #C8825
   $79.95

60mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .060" Thick
   For 59 to 60mm bore size.
   May be used with DP572 Kits
     Will alter compression ratio.

   #DP H-60-MLS060
   $89.95

60mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
  
Copper, Dead Soft
   .032" Thick
   For 59 to 60mm bore size

   May be used with DP572 Kits
     Will alter compression ration,
     please check clearances carefully.


   #DP H-60-COP032
   $69.95

60mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
  
Copper, Dead Soft
   .043" Thick
   For 59 to 60mm bore size

   May be used with DP572 Kits

   #DP H-60-COP043
   $69.95

60mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
  
Copper, Dead Soft
   .050" Thick
   For 59 to 60mm bore size

   May be used with DP572 Kits
     Will alter compression ration


   #DP H-60-COP050
   $69.95


CB500 / 550 / 650  continued...
61mm

61mm HEAD GASKETCFM Gasket at Dynoman
  
CFM-20
   .043" Thick
   61mm bore size
   For use with DP592 Kits

   #DP H-61-CFM043
   $54.34

61mm HEAD GASKETCFM Gasket at Dynoman
  
CFM-20
   .059" Thick
   61mm bore size
   May be used with DP592 Kits,
     Will alter compression ration

   #DP H-61-CFM059
   $54.34

61mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .030" Thick
   For 61mm bore size
   May be used with DP592 Kits ,
     Will alter compression ration,
     please check clearances carefully.

   #DP H-61-MLS030
   $79.95

61mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .036" Thick
   For 61mm bore size
   May be used with DP592 Kits ,
     Will alter compression ration,
     please check clearances carefully.

   #DP H-61-MLS036
   $79.95

61mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .040" Thick
   For 61mm bore size
   For use with DP592 Kits

   #C8826
   $79.95

61mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .060" Thick
   For 61mm bore size
   May be used with DP592 Kits
     Will alter compression ratio.

   #DP H-61-MLS060
   $89.95

 
61mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
  
Copper, Dead Soft
   .032" Thick
   For 61mm bore size

   May be used with DP592 Kits

     Will alter compression ration,
     please check clearances carefully.


   #DP H-61-COP032
   $69.95

61mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
   Copper, Dead Soft
   .043" Thick
   For 61mm bore size

   May be used with DP592 Kits


   #DP H-61-COP043
   $69.95

61mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
   Copper, Dead Soft
   .050" Thick
   For 61mm bore size

   May be used with DP592 Kits
     Will alter compression ration.

   #DP H-61-COP050
   $69.95


CB500 / 550 / 650  continued...
62mm
62mm HEAD GASKETCFM Gasket at Dynoman
   CFM-20
   .043" Thick
   For 62mm bore size

   For use with with DP674 Kits
   1979-82 CB650 Honda

   #DP H-62-CFM043
   $54.34

62mm HEAD GASKETCFM Gasket at Dynoman
  
CFM-20
   .059" Thick
   62mm bore size
   May be used with DP592 Kits,
     Will alter compression ration

   #DP H-62-CFM059
   $54.34

62mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .030" Thick
   For 62mm bore size
   For use with with DP674 Kits
     Will alter compression ration,
     please check clearances carefully.

   1979-82 CB650 Honda

   #DP H-62-MLS030
   $79.95

62mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .040" Thick
   For 62mm bore size
   For use with with DP674 Kits
   1979-82 CB650 Honda

   #C8827
   $79.95

62mm HEAD GASKETMLS Head Gasket at Dynoman
   Multi-Layer Steel (MLS)
   .050" Thick
   For 62mm bore size
   For use with with DP674 Kits
    Will alter compression ration.
   1979-82 CB650 Honda

   #DP H-62-MLS050
   $79.95



62mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
   Copper, Dead Soft
   .032" Thick
   For 62mm bore size

   May be used with DP674 Kits
     Will alter compression ration,
     please check clearances carefully.

   1979-82 CB650 Honda


   #DP H-62-COP032
   $69.95

62mm HEAD GASKETCopper Head nad Base Gaskets at Dynoman
   Copper, Dead Soft
   .043" Thick
   For 62mm bore size

   May be used with DP674 Kits
   1979-82 CB650 Honda


   #DP H-62-COP043
   $69.95


CB500 / 550 / 650  continued...
BASE GASKETS
.010" THICK

#DP B-550-RC010 Base Gasket

     For stock liners
     Rubber Coated Steel (Viton®) 
     .010" Thick
     For use with DP592, 572 and 674 Piston Kits
    $44.95
    
.014" THICK

#DP B-550-RC014 Base Gasket

     For stock liners
     Rubber Coated Steel (Viton®) 
     .014" Thick
     For use with DP592, 572 and 674 Piston Kits
    $44.95
    
.020" THICK

#DP B-550-RC020 Base Gasket
     For stock liners
     Rubber Coated Steel (Viton®) 
     .020" Thick
     For use with DP592, 572 and 674 Piston Kits
    $44.95
    

CBR600  
#C8265 Head Gasket
    67mm, MLS, 1991-98 CBR600F2 / F3
    $87.73

#C8706-027 Head Gasket
    69mm, MLS, .027", .030", 2003-06 CBR600rr
    $87.73
#C8736 Head Gasket
    68.5mm, MLS, .027", 2007-11 CBR600rr
    $83.52
#C8737 Head Gasket
    70mm, MLS, .027", 2007-11 CBR600rr
    $83.52

NT650 GT HAWK  
#C8207/8520 Combination Head & Base Gasket set
    82mm, Stainless Head Gaskets (2)
    Copper .010" Base Gaskets (2)
    For 1988-91 NT650 Honda
    $85.06
#C8207 Head Gasket set
    82mm, Stainless Head Gaskets (2)
    For 1988-91 NT650 Honda

    $
54.34
SOHC CB750  
         CB750 F/K 1969-78
Please visit our SOHC section!
- Head Gaskets
- Base Gaskets
- Cam Cover Gasket
- Vesrah Complete Gasket Sets


 
DOHC CB750  
         CB750 F/K/C 1979-82
#C8003 HEAD GASKET
   65mm -- CFM-20 -- .043" -- 823cc

    $54.34  
  
# DP H-835-CFM043 HEAD GASKET
   66mm   -  CFM20   -  .043"   -   835cc
   For use in our DP835/dohc Piston Kit
   $54.34
#C8004 HEAD GASKET
   70mm -- CFM-20 -- .043" -- 890-955cc

    $54.34  
  
#C8521-RCS BASE GASKET
   74mm Rubber Coated Steel (Viton®) .020"
   Stock bore to 985cc (stock liners)
   $39.95
#C8454 FIBER BASE GASKET
   .020"   Fiber   Stock Bore to 985cc
   $13.29
#C8451 COPPER BASE GASKET
   .005" Copper   Stock Bore to 985cc
   $35.38
#C8452 COPPER BASE GASKET
   .010" Copper   Stock Bore to 985cc
   $33.68
#C8453 COPPER BASE GASKET
   .020" Copper   Stock Bore to 985cc
   $33.68
DOHC CB900  
         CB900F 1981-82 (see 1100F also)
#C8005 Head Gasket
   68mm -- CFM-20 -- .043" -- 985cc

   $54.34 
  
#C8006 Head Gasket
   72mm -- .043" -- CFM-20

   $54.34  
  

#C8224 Head Gasket
   72mm -- 1123cc -- Copper -- .043"

   $65.64
  

#C8224-050 Head Gasket
   72mm -- 1123cc -- Copper -- .050"

    $65.64
#C8521-RCS BASE GASKET
   75.8mm/2.99" OD   Rubber Coated Steel (Viton®) .020"
   Stock bore to 985cc (stock liners)
   $44.95
DOHC CB1100
         CB1100F 1983 (see 900F also)
#C8006 Head Gasket
   72mm -- CFM-20 -- 1123cc

    $54.34 
  
#C8224 Head GasketDP Gasket for CB1100F at Dynoman
   72mm -- Copper -- .043" -- 1123cc

    $65.64  
  

#C8224-050 Head GasketDP Gasket for CB1100F at Dynoman
   72mm -- 1123cc -- Copper -- .050"

    $65.64  
#C8225 Head Gasket
   74mm -- Copper -- .043" -- 1186cc

   $62.51  
  
#C8007 Head Gasket
   75mm -- Copper -- .020" -- 1219cc

    $59.46 
  
#C8521-RCS BASE GASKET
   75.8mm / 2.99" O.D.   Rubber Coated Steel (Viton®) .020"
    $44.95
#W6047 / C8451 Base Gasket
   73.6mm O.D. -- 2.90" -- .005" -- Copper

   $35.38  
#B0302020 - RCS BASE GASKET (custom)
   3.13" / 79.5mm O.D.   Rubber Coated Steel (Viton®) .020"
   $39.95

RC51 / RVT1000r
#C8765 Head Gasket
   102.5mm -- MLS -- set of (2)
   $83.52

   more models available! email dynoman

   KAWASAKI
         KZ, GPz750, ZX750 Turbo
#C8012 Head GasketDP C8012 Head Gasket at Dynoman
   69mm -- CFM-20 -- 810cc

    $54.34  
  
 
 
          ZX-7 / ZX750  1991-95  
#H0540SP4027S HEAD GASKETHead Gasket - ZX7 Kawasaki at Dynoman
     72.5mm -- MLS -- .027"
     $83.52

 
#H0540SP4030S HEAD GASKETHead Gasket - ZX7 Kawasaki at Dynoman
     72.5mm -- MLS -- .030"
     $83.52
 

 
#C8013 Head Gasket
   75mm -- CFM20
   Fits 91-95 ZX750r and 86-87 Ninja 1000
   $54.34

         KZ900 / Z-1 / 1000
#C8152 Head GasketDP C8152 Head Gasket at Dynoman - KZ900
   70mm -- 1-piece -- Copper -- .043" -- 1015cc
   $65.64  
#C8839-040 Head GasketDP MLS Head Gasket for KZ1000 at Dynoman
   71mm   1045cc   MLS   .040"
   $83.52

#C8315 Head Gasket
   71mm -- 2-piece -- Copper -- .043" -- 1045cc

    $62.51  
  
#C8018 Head Gasket
   72mm -- 1-piece -- CFM-20 -- 1015 to 1075cc

    $54.34  
  

#C8840-040 Head GasketDP MLS Head Gasket for KZ1000 at Dynoman
   73mm   1105cc   MLS   .040"
   $83.52
#C8244  Head Gasket
   74mm -- 2-piece -- Copper -- .043" -- 1135cc

    $65.64   
  
#C8019 Head Gasket
   73 to 74mm -- 1-piece -- CFM-20 -- 1075-1135cc

    $54.34  
  

#C8017 Head Gasket
   75mm -- 1-piece -- CFM-20 -- 1075-1170cc -- .043"
   $51.73  
#C8841-040 Head GasketDP MLS Head Gasket for KZ1000 at Dynoman
   76mm   1197cc   MLS   .040"
   $83.52
#C8156 Head Gasket
   76mm -- Copper -- 1197cc -- .043"

    $65.64  
    Available by special order, please allow 1 to 3 weeks
  
#H0351043C Head Gasket
   76mm -- Copper - 1197cc -- .043" -- 2 Piece
   $65.64
   Available by special order, please allow 1 to 3 weeks
#C8020 Head GasketDP C8020 Head Gasket at Dynoman
   76mm -- 1-piece -- CFM-20 -- 1170-1200cc

    $54.34
  
#C8021 Head Gasket
   78mm -- 1-piece -- CFM-20 -- 1230-1260cc

    $54.34
  
#C8093 BASE GASKET
   1000-1200cc Fiber  -- 3.21" ID
    $19.95  
    Please allow 1 to 3 weeks on this special order item - thanks!

 
#C8093-RCS BASE GASKET
   1000-1200cc Rubber Coated Steel (Viton®) .020"
   3.21" ID  81.53mm
    $39.95
  
#C8097-RCS BASE GASKET
   1230-1260cc Rubber Coated Steel (Viton®) .020"
   3.285" ID  83.4mm
   $44.95

More head and base gasket sizes available by special order...
email us with your needs!

 
 
         ZX-9 1994-97
#C8272 Head Gasket
   75mm -- .030" -- Spring Steel

   $87.73
  
 
         ZX900 NINJA / GPZ900R
         ZX1000R  1986-87
         ZX750r 1991-95 
#C8013 Head Gasket
   75mm -- CFM20 --  .043" --   972cc
   $54.34



 
         KZ1000 CSR, P, R
         GPZ1100 1984-85
#B0269020RC BASE GASKET
    Rubber Coated Steel (Viton®) .020"
    $35.38


         KZ1000J 1981-83   &  GPz1100 81-85
#C8842-040 Head Gasket
   71mm --  1045cc --  MLS --  .040"
   $83.52

#C8324 Head Gasket
   72mm -- CFM-20 -- 1075cc -- 2-piece

    $51.73
  
#C8843-040 Head Gasket
   73mm --  1105cc --  MLS  -- .040"
   $83.52

#C8325 Head Gasket
   74mm -- CFM-20 -- 1135cc
  --  2-piece
    $54.34
  
#C8326 Head Gasket
   76mm  --  2 piece  --  CFM20  -  1197cc
   $54.34
#C8844-040 Head Gasket
   76mm --  1197cc --  MLS --  .040"
   $83.52

#C8845-040 Head Gasket
   78mm  -- 1230-1260cc  -- MLS  -- .040"
   $83.52


#B0269020RC BASE GASKET
   Stock Sleeves --  Rubber Coated Steel (Viton®)  -- .020"
    $39.95


 
         ZX11, D1, C  1990-2000
         GPZ1100 1995-96
#C8273 Head Gasket
   78mm   .030 S/S 1109cc
    $83.52   
         ZRX1200 2001-05
         ZZR1200 2001-05
         ZR1 2001-05
#C8711 Head GasketDP Head Gasket for ZRX1200 at Dynoman
   80mm -- MLS/COT -- .027" -- 1194cc

    $87.73
  
#H2488SP1030S Head GasketDP Head Gasket for ZRX1200 at Dynoman
     81mm -- MLS -- .030"
     $87.73 

 

    more models available! email dynoman

   SUZUKI
         GSXR750/1000 2000-04
#C8663 Head Gasket
   73mm -- MLS -- .030"

    $83.52
  
   
         GS750/850 2-Valve  
#C8028 Head Gasket
   69mm -- CFM-20 -- .043"

    Available by special order, please allow 10 to 14 days
    $54.34
  

 

         GS750  4-Valve

 
#C8549 Base Gasket
   2.953" Fiber .020"

   $13.97  
         GS1000 1978-81    2-VALVE ENGINES
HEAD GASKETS for GS1000  
#C8030 CFM20 Head Gasket
   73.5mm -- CFM-20 -- 997-1100cc
   $54.34
  
#C8408 Copper Head Gasket
   73.5mm -- Copper -- .043" -- 997-1100cc
   $65.64
  
#C8030-78 CFM Head Gasket
   78mm -- CFM20 -- .043" -- 1238cc
   $54.34

#C8030-78 Copper Head Gasket
   78mm -- Copper -- .043" -- 1238cc
   $65.64
BASE GASKETS for GS1000
#C8364 COPPER BASE GASKET
   3.110" -- Copper -- .020" -- For use with stock sleeves
   $35.38  

#C8364-RCS BASE GASKET
   Stock liners to 1100cc -- Rubber Coated Steel (Viton®) .020"
   3.110" -- RCS -- .020" -- For use with stock sleeves
   $39.95
#DP B-GS1238-RCS BASE GASKET
   For use with DP SLV3010FA Sleeves
   and DP GS78 (1238cc) Piston Kits
   83.7mm ID, Rubber Coated Steel (Viton®) .020"
    $39.95


         GS1100    4-VALVE ENGINES
#C8212AFM Cam Cover Gasket, .047" Fiber,
  
(Early model, 20 bolt)
   $19.87
  
HEAD GASKETS FOR GS1100
#C8163-MLS Head Gasket
   72mm -- MLS -- .040" -- 1075cc (stock)
   $87.73
#C8031 Head Gasket
   75mm -- CFM-20 -- .043" -- 1133-1168cc
   $54.34
  
#C8728-045 Head Gasket
   75mm -- MLS -- .045" -- 1100-1168cc
   11mm dowel pins

   $87.73
#C8728-060 Head Gasket - custom made, please allow 3 weeks
   75mm -- MLS -- .060" -- 1100-1168cc
   $134.00

#DP H0142043C Head Gasket
   75mm -- Copper -- .043" -- 1100-1168cc
   11mm Dowel Pins
   $65.64


#C8729-045 Head Gasket
   76mm -- MLS -- .045" -- 1167-1198cc
   11mm dowel pins
   $87.73
  
#C8032 Head Gasket
   76mm -- CFM-20 -- .043" -- 1168-1198cc
   $51.73 
#C8166-CFM Head Gasket
   78mm -- CFM-20 --  .043" -- to 1260cc
   $54.34
  
#C8166 Copper Head Gasket
   78mm -- Copper -- .043" -- to 1260cc
   $65.64 
#C8166-MLS Head Gasket
   78mm -- MLS -- .045" -- to 1260cc
   $87.73
  
#C8033 Head Gasket
   79mm -- CFM-20 -- .043" -- 1228-1290cc
   $51.73 
  
#C8730-045 Head Gasket
   79mm -- MLS -- .040" -- 1228-1290cc
   11mm dowel pins
   $87.73
BASE GASKETS FOR GS1100
#C8109 FIBER BASE GASKET
   1100-1168cc -- 3.130" -- Fiber -- .020"
   Available by special order, please allow 10 to 14 days production time.
   $19.95
  
#C8112 COPPER BASE GASKETDP Base Gasket for GS1100 at Dynoman
   1100 to 1168cc -- .020" -- 3.130" Bore
   Copper
   $39.95
#C8112-043 COPPER BASE GASKETDP Base Gasket for GS1100 at Dynoman
   1100 to 1168cc -- .043" -- 3.130" Bore
   Copper

   $39.95
#C8109-RCS BASE GASKETDP Viton Base Gasket for GS1100 at Dynoman
   1100-1168cc -- 3.130" ID
   Rubber Coated Steel (Viton®) .020"

   $39.95

  
#C8113 FIBER BASE GASKET
   1198-1260cc -- Fiber -- .020" -- 3.290" ID
    Available by special order, please allow 10 to 14 days production time.
   $19.95
#C8113-RCS BASE GASKETDP Viton Base Gasket for GS1100 at Dynoman
   1198 to 1260cc
   Rubber Coated Steel (Viton®) .020"
   3.290 / 83.6mm ID
   $39.95
#C8115 COPPER BASE GASKETDP Base Gasket for GS1100 at Dynoman
   1198-1260cc -- Copper -- .010" -- 3.290 ID
   Copper
   $39.95
Available by special order, please allow 10 to 14 days.
#C8116 COPPER BASE GASKETDP Base Gasket for GS1100 at Dynoman
   1198 to 1260cc -- 3.290" ID -- .020"
   Copper
   $39.95
 
YAMAHA
          
       YZF1000 / FZR1000  
#C8283 Head Gasket
   77mm -- 1040cc -- Spring Steel
   1987-95 FZR and 97 YZF
   $87.73
  
#C8388 Head Gasket
    78mm 1070cc Spring Steel
   1987-95 FZR and 97 YZF
    For use with DP1070/fzr Piston Kits
   $87.73

  

#C8382 Base Gasket
    3.260" Bore for 1070cc
    Rubber Coated Steel (RCS)
     For use with DP1070/fzr Piston Kits
    $39.95


       XS1100  
#C8046 HEAD GASKET
   76mm, 1148 - 1179cc, CFM-20
   $54.34

    more models available! email dynoman

 

ABOUT MULTI-LAYER STEEL HEAD GASKETSMLS Head Gasket copyright Dynoman
Developed  and manufactured in the USA.
MLS stands for Multi-Layer Steel. MLS head gaskets are comprised of three layers of stainless steel. The outer layers are an embossed Viton® coated stainless steel providing a superior seal with excellent rebound characteristics and are corrosive resistant. MLS head gaskets reduce bore distortion and withstand extreme cylinder pressures.

DP Multi-Layer Steel (MLS) head gaskets go on dry because they are coated with a sealant. Each MLS head gasket is coated with a .001" thick Viton rubber that is bonded to the outer stainless steel layers. Adding an additional sealer can hinder the performance of an MLS head gasket.
MLS Head Gasket copyright Dynoman
A surface finish of 50 RA (roughness average) or finer, is recommended for a proper gasket seal. Anything rougher may conflict with the gasket design.

When using MLS head gaskets always refer to the manufacturer (OE) of the fastener to determine accurate torque values.

 

 

•Provide maximum sealing performance for today's high output engines and require no sealants
•Ideal for aluminum heads to aluminum blocks and aluminum heads to cast iron blocks withstanding the shearing force created by the two materials.
•No need to re-torque, the embossing design of the MLS gasket promotes an even clamp load across the sealing surface allowing for measurable reduced bore distortion

DP MLS Gaskets are comprised of multiple layers of stainless steel due to it's increased strength, ability to rebound and resistance to corrosion.

The outer layers of the gaskets are embossed and coated on both sides with Viton - a flouroelastomer rubber based material that is heat resistant to 250°C /482ºF. Viton is designed to meet the demands of a variety of harsh sealing environments, load conditions, and surface finishes.

The center or shim layer is uncoated stainless steel layer which can be varied to accommodate multiple thickness requirements.


ABOUT RUBBER COATED STEEL BASE GASKETS
Rubber coated single layer steel base gaskets are Viton® rubber coated with a steel core and in some instances embossed. Quite simply the best base gasket made for most applications!

 

 

 

 

 

 

 

 

 

 

 
 
 
For your security and ours, we process
our payments
through Paypal.
PayPal Logo
PayPal Acceptance Mark


2000-17 DynomanPerformance.com
All rights reserved. Prices, descriptions, and products subject to change without notice.

dynoman-performance@austin.rr.com